Soderon® FS 155 – Aluminum

Product Results // Soderon® FS 155 – Aluminum

SODERON® FS/155 fast solder magnet wire is designed to be utilized where the particular coil or component design may utilize the unique solder stripping property. SODERON® FS/155 magnet wire with its improved fast solder polyurethane film, over coated with nylon, surpasses standard Class 130 and 155 in its speed of solderability and can be used in a wide array of wire applications. The film lends itself to the precise process control required in manufacturing many electrical/ electronic devices.

As with all solderable magnet wire, care must be exercised in the application of SODERON® FS/155 magnet wire since this material does not exhibit overload resistance properties like most nonsolderable Classes 105, 130 and 155 resin.

SODERON® FS/155 is recommended but not limited to the following applications:
• Bobbin wound and paper section coils
• Molded and encapsulated coils
• Small motors, armature and fields
• Automotive coils
• Toroidal coils

Material Aluminum Temp 155°C
Insulation Polyurethane, Polyamide
Shapes Round
Sizes

10 – 27 AWG, Single Build
10 – 27 AWG, Heavy Build

Standards

NEMA:  MW 80

Locations
  • Asia Pacific
Applications
  • Automotive
  • Commercial, Residential
  • Energy
  • Industrial
  • Transportation
Material Aluminum Temp 155°C
Insulation Polyurethane, Polyamide
Shapes Round
Sizes

10 – 27 AWG, Single Build
10 – 27 AWG, Heavy Build

Standards

NEMA:  MW 80

Locations
  • Asia Pacific
Applications
  • Automotive
  • Commercial, Residential
  • Energy
  • Industrial
  • Transportation

Click the platform below that you would like to share this on. Thanks for sharing!